MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
Other constant and variable speeds from 30 to 120 FPM. Over 120 FPM timing belt drive recommended. Capacity affected with speed change.
Separate section relocates drive shaft from one side of conveyor to the other. Minimum Elevation-12-3/8 in.
Continuous adjustable channel, fixed channel or type A & B angle. NOTE: If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing.
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.
Energy efficient, single phase, other characteristics. 2 HP maximum.
Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive.